Affiliation:
1. , Xi’an University of Science and Technology, , , China
Abstract
Based on the working condition of the magnetic thrust bearing (MTB), the single-objective optimization model (SOOM) is built. The optimum design of structure parameters for two types of magnetic bearings including traditional carbon bearing and soft magnetic composite (SMCs) bearing has been carried out using genetic algorithm. The analysis of eddy current field for two types of bearings are obtained by FEM. It is found that the maximum eddy current field of SMCs bearing is less than that of carbon steel one, and the air gap magnetic density is larger than that of carbon steel bearing at the same frequency. SMCs obtained by the compression of insulated soft magnetic powders have low eddy current. Thus, under the same magnetic force conditions, the input current of SMCs bearings is lower than that of carbon steel ones. The analysis shows that SMCs can replace carbon steel and has superiority in bearing application.
Subject
Electrical and Electronic Engineering,Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,Electronic, Optical and Magnetic Materials
Reference8 articles.
1. Elliptic motions and control of rotors suspending in active magnetic bearings;Yang;Journal of Computational and Nonlinear Dynamics,2016
2. Experimental studies on support systems of high-speed motors with flexible squirrel-cage support and squeeze film dampers;Tian;Proceedings of the CSEE,2012
3. Eddy current loss analysis in radial magnetic bearings with solid rotor;Sun;Proceedings of the CSEE,2002
4. Dynamic stiffnesses of active magnetic thrust bearing including eddy-current effects;Sun;IEEE Trans. Magn.,2009
5. Modeling of non-laminated electromagnetic suspension systems;Zhu;IEEE/ASME Trans. Mechatronics,2010
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献