N 1-(3-Trimethoxysilylpropyl)diethylenetriamine grafted KIT-6 for CO2/N2 selective separation-Reference-Cited by-同舟云学术

N 1-(3-Trimethoxysilylpropyl)diethylenetriamine grafted KIT-6 for CO2/N2 selective separation

Published:2016 Issue:2 Volume:6 Page:898-909
ISSN:2046-2069
Container-title:RSC Advances
language:en
Short-container-title:RSC Adv.

Author:

Kishor Rupak¹²³⁴,Ghoshal Aloke Kumar¹²³⁴

Affiliation:

1. Department of Chemical Engineering

2. Indian Institute of Technology Guwahati

3. Guwahati-781039

4. India

Abstract

In the present study N¹-(3-trimethoxysilylpropyl)diethylenetriamine was grafted on various ordered and commonly used mesoporous silica namely MCM-41 (2.2 nm), SBA-15 (6.6 nm) and KIT-6 (6.6 nm) in both anhydrous and aqueous conditions for CO₂/N₂ adsorption.

Publisher

Royal Society of Chemistry (RSC)

Subject

General Chemical Engineering,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2016/RA/C5RA20489E

Reference54 articles.

1. Annual energy outlook 2015 with projections to 2040. (http://www.eia.gov/forecasts/aeo/)

2. CO2 capture and storage: are we ready?

3. Worldwide innovations in the development of carbon capture technologies and the utilization of CO2

4. Pilot Plant Studies of the CO2 Capture Performance of Aqueous MEA and Mixed MEA/MDEA Solvents at the University of Regina CO2 Capture Technology Development Plant and the Boundary Dam CO2 Capture Demonstration Plant

5. Zeolites and related sorbents with narrow pores for CO2 separation from flue gas

Cited by 25 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. 3D-bioprinted poly(lactic acid)/β-TCP/mesoporous silica scaffolds: An investigation on in-vitro bioactivity and osteogenesis characteristics;Materials Today Chemistry;2024-09

2. 3D Printed P(VdF‐HFP)/SBA‐15 composite‐based gel polymer electrolyte versus commercial celgard: A comparative investigation on thermal stability and electrochemical performance for lithium‐ion battery application;Journal of the American Ceramic Society;2024-05-10

3. Direct CO2 capture from simulated and Ambient Air over aminosilane-modified hierarchical silica;Microporous and Mesoporous Materials;2024-03

4. Excellent CO2 adsorption performance of amine-impregnated highly porous ZIF-8 adsorbent: Experimental and isotherm modeling studies;Advanced Powder Technology;2024-02

5. Tailoring of 3D printed polyethylenimine functionalized MCM-41 based monoliths and scrutiny on CO2 adsorption characteristics;Journal of Environmental Chemical Engineering;2023-10