An argyrodite sulfide coated NCM cathode for improved interfacial contact in normal-pressure operational all-solid-state batteries-Reference-Cited by-同舟云学术

An argyrodite sulfide coated NCM cathode for improved interfacial contact in normal-pressure operational all-solid-state batteries

Published:2023 Issue:38 Volume:11 Page:20549-20558
ISSN:2050-7488
Container-title:Journal of Materials Chemistry A
language:en
Short-container-title:J. Mater. Chem. A

Author:

Kim Jun Tae¹²^ORCID,Shin Hyeon-Ji¹³^ORCID,Kim A-Yeon¹^ORCID,Oh Hyeonseong¹,Kim Hun²^ORCID,Yu Seungho¹^ORCID,Kim Hyoungchul⁴^ORCID,Chung Kyung Yoon¹³^ORCID,Kim Jongsoon⁵⁶^ORCID,Sun Yang-Kook²^ORCID,Jung Hun-Gi¹³⁵⁶^ORCID

Affiliation:

1. Energy Storage Research Center, Korea Institution of Science and Technology, Seoul 02792, Republic of Korea

2. Department of Energy Engineering, Hanyang University, Seoul 04763, Republic of Korea

3. Division of Energy and Environment Technology, KIST School, Korea University of Science and Technology, Seoul 02792, Republic of Korea

4. Energy Materials Research Center, Korea Institution of Science and Technology, Seoul 02792, Republic of Korea

5. KIST-SKKU Carbon-Neutral Research Center, Sungkyunkwan University, Suwon 16419, Republic of Korea

6. Department of Energy Science, Sungkyunkwan University, Suwon 16419, Republic of Korea

Abstract

The introduction of the Li6PS5Cl solid electrolyte coating layer forms a better Li+ ionic pathway within the composite cathode. This enables high discharge capacity and long cycle life with intimate interfacial contact.

Funder

Korea Institute of Science and Technology

National Research Foundation of Korea

Ministry of Science and ICT, South Korea

Ministry of Trade, Industry and Energy

Publisher

Royal Society of Chemistry (RSC)

Subject

General Materials Science,Renewable Energy, Sustainability and the Environment,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2023/TA/D3TA03283C

Reference47 articles.

1. Li-ion battery materials: present and future

2. Designing solid-state electrolytes for safe, energy-dense batteries

3. Lithium/Sulfide All‐Solid‐State Batteries using Sulfide Electrolytes

4. Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

5. A review of challenges and issues concerning interfaces for all-solid-state batteries

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Dendrite-Free Li_5.5PS_4.5Cl_1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation;ACS Applied Materials & Interfaces;2024-05-10