Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks-Reference-Cited by-同舟云学术

Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks

Published:2014 Issue:33 Volume:2 Page:5378-5386
ISSN:2050-750X
Container-title:J. Mater. Chem. B
language:en
Short-container-title:J. Mater. Chem. B

Author:

Maazouz Y.¹²³⁴⁵,Montufar E. B.¹²³⁴⁵,Guillem-Marti J.¹²³⁴⁵,Fleps I.¹²³⁴,Öhman C.⁶⁷⁸⁹,Persson C.⁶⁷⁸⁹,Ginebra M. P.¹²³⁴⁵

Affiliation:

1. Biomaterials, Biomechanics and Tissue Engineering Group

2. Department of Materials Science and Metallurgical Engineering

3. Technical University of Catalonia

4. , Spain

5. Biomedical Research Networking Center in Bioengineering

6. Division of Applied Materials Science

7. Department of Engineering Sciences

8. Uppsala University

9. Sweden

Abstract

A new self-setting ceramic ink was developed for robocasting of biomimetic hydroxyapatite scaffolds, based on alpha-tricalcium phosphate and gelatine. After setting a biomimetic hydroxyapatite is obtained, with higher reactivity and resorbability than high-temperature sintered hydroxyapatite. The setting reaction of the ink results in a significant increase of the mechanical properties of the scaffolds.

Publisher

Royal Society of Chemistry (RSC)

Subject

General Materials Science,Biomedical Engineering,General Chemistry,General Medicine

Link

http://pubs.rsc.org/en/content/articlepdf/2014/TB/C4TB00438H

Reference42 articles.

1. Porosity of 3D biomaterial scaffolds and osteogenesis

2. Direct Ink Writing of Three-Dimensional Ceramic Structures

3. Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications

4. Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel

Cited by 95 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Ink formulation in direct ink writing of ceramics: A meta-analysis;Journal of the European Ceramic Society;2024-09

2. Enhancing the Mechanical Performance of 3D-printed Self-hardening Calcium Phosphate Bone Scaffolds: PLGA-based Strategies;Ceramics International;2024-09

3. Self-hardening polycaprolactone/calcium phosphate inks for 3D printing of bone scaffolds: rheology, mechanical properties and shelf-life;Materials & Design;2024-07

4. Calcium Orthophosphate (CaPO4) Containing Composites for Biomedical Applications: Formulations, Properties, and Applications;Journal of Composites Science;2024-06-08

5. Toughening 3D printed biomimetic hydroxyapatite scaffolds: Polycaprolactone-based self-hardening inks;Acta Biomaterialia;2024-03