9.6%-Efficient all-inorganic Sb<sub>2</sub>(S,Se)<sub>3</sub> solar cells with a MnS hole-transporting layer-Reference-Cited by-同舟云学术

9.6%-Efficient all-inorganic Sb₂(S,Se)₃ solar cells with a MnS hole-transporting layer

Published:2022 Issue:6 Volume:10 Page:2835-2841
ISSN:2050-7488
Container-title:Journal of Materials Chemistry A
language:en
Short-container-title:J. Mater. Chem. A

Author:

Qian Chen¹^ORCID,Li Jianjun¹,Sun Kaiwen¹^ORCID,Jiang Chenhui²^ORCID,Huang Jialiang¹,Tang Rongfeng²^ORCID,Green Martin¹,Hoex Bram¹,Chen Tao²^ORCID,Hao Xiaojing¹

Affiliation:

1. Australian Centre for Advanced Photovoltaics, School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW 2052, Australia

2. Hefei National Laboratory for Physical Sciences at Microscale, CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China

Abstract

Post-annealing treatment to MnS can improve the interface quality, increase the carrier concentration in MnS and optimize the band alignment, leading to a high power conversion efficiency of 9.67% and excellent stability of Sb2(S,Se)3 solar cells.

Funder

Australian Renewable Energy Agency

National Natural Science Foundation of China

National Key Research and Development Program of China

Australian Centre for Advanced Photovoltaics

Australian Research Council

Publisher

Royal Society of Chemistry (RSC)

Subject

General Materials Science,Renewable Energy, Sustainability and the Environment,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2022/TA/D1TA09913B