Achieving performance and longevity with butane-operated low-temperature solid oxide fuel cells using low-cost Cu and CeO2 catalysts-Reference-Cited by-同舟云学术

Achieving performance and longevity with butane-operated low-temperature solid oxide fuel cells using low-cost Cu and CeO2 catalysts

Published:2022 Issue:5 Volume:10 Page:2460-2473
ISSN:2050-7488
Container-title:Journal of Materials Chemistry A
language:en
Short-container-title:J. Mater. Chem. A

Author:

Thieu Cam-Anh¹²^ORCID,Yang Sungeun¹^ORCID,Ji Ho-Il¹²^ORCID,Kim Hyoungchul¹^ORCID,Yoon Kyung Joong¹^ORCID,Lee Jong-Ho¹²^ORCID,Son Ji-Won¹²³^ORCID

Affiliation:

1. Energy Materials Research Center, Korea Institute of Science and Technology (KIST), 14-5 Hwarang-ro, Seongbuk-gu, Seoul 02792, Republic of Korea

2. Division of Nano & Information Technology, KIST School, Korea University of Science and Technology (UST), Seoul 02792, Republic of Korea

3. Graduate School of Energy and Environment, KU-KIST Green School, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea

Abstract

Record high performance and longevity is reported for a butane-fueled low-temperature-operating solid oxide fuel cell (LT-SOFC). Affordable catalysts, Cu and CeO2, were incorporated into a thin-film-based SOFC to enable this remarkable enhancement.

Funder

Korea Institute of Energy Technology Evaluation and Planning

National Research Foundation of Korea

Korea Institute of Science and Technology

Publisher

Royal Society of Chemistry (RSC)

Subject

General Materials Science,Renewable Energy, Sustainability and the Environment,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2022/TA/D1TA06922E

Reference102 articles.

1. Overview of U.S. Department of Energy Office of Fossil Energy’s Solid Oxide Fuel Cell Program for FY2019

2. A.Pappacena , L.Bardini , M.Boaro , in Advances in Medium and High Temperature Solid Oxide Fuel Cell Technology , ed. M. Boaro and A. S. Aricò , Springer International Publishing , 1st edn, 2017 , pp. 155–222 , 10.1007/978-3-319-46146-5

3. Advances in solid oxide fuel cell technology

4. Solid oxide fuel cells fueled by simulated biogas: Comparison of anode modification by infiltration and reforming catalytic layer

5. Powder Packing Behavior and Constrained Sintering in Powder Processing of Solid Oxide Fuel Cells (SOFCs)

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. One-step preparation of large-size 1.5-μm-thick robust YSZ electrolyte for high CH4 conversion SOFCs at 600 °C;Separation and Purification Technology;2024-12

2. Effects of water on the degradations in the Ni-YSZ anode of the direct ammonia solid oxide fuel cells;Chemical Engineering Journal;2024-10

3. Unusual Promoting Effect of Ni–Cu Alloy Formation on Carbon Deposition in Carbonate-Superstructured Solid Fuel Cell with Methane Fuel;Industrial & Engineering Chemistry Research;2024-02-28

4. Impact of dopant X in zirconia on carbon deposition at the Nickel/X-stabilized zirconia(XSZ) surface in dry CH4 and CH4/H2O environments: First-principles density functional theory calculation and experimental study;International Journal of Hydrogen Energy;2024-01

5. Customized CO₂ electroreduction to methane or ethylene by manipulating *H and *CO adsorption on Cu/CeO_x catalysts;Journal of Materials Chemistry A;2024