The porous transport layer in proton exchange membrane water electrolysis: perspectives on a complex component-Reference-Cited by-同舟云学术

The porous transport layer in proton exchange membrane water electrolysis: perspectives on a complex component

Published:2022 Issue:8 Volume:6 Page:1824-1853
ISSN:2398-4902
Container-title:Sustainable Energy & Fuels
language:en
Short-container-title:Sustainable Energy Fuels

Author:

Yuan Xiao-Zi¹^ORCID,Shaigan Nima¹,Song Chaojie¹,Aujla Mantaj¹,Neburchilov Vladimir¹,Kwan Jason Tai Hong²,Wilkinson David P.²,Bazylak Aimy³^ORCID,Fatih Khalid¹

Affiliation:

1. National Research Council Canada, 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada

2. Department of Chemical and Biological Engineering, Clean Energy Research Centre, University of British Columbia, 2360 East Mall, Vancouver, BC, V6T 1Z3, Canada

3. Department of Mechanical & Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, ON, M5S 3G8, Canada

Abstract

The Ti-based PTL materials used in PEMWEs are reviewed. A compendium of attributes of PTLs is established. Impact of the PTL/CL interface on cell performance is examined. Correlation between the PTL properties and cell performance is investigated.

Funder

National Research Council Canada

Publisher

Royal Society of Chemistry (RSC)

Subject

Energy Engineering and Power Technology,Fuel Technology,Renewable Energy, Sustainability and the Environment

Link

http://pubs.rsc.org/en/content/articlepdf/2022/SE/D2SE00260D

Reference124 articles.

1. A.Kahan , International Energy Outlook , 2019 , retrieved from https://www.eia.gov/todayinenergy/detail.php?id=41433#

2. Review of gas diffusion layer for proton exchange membrane-based technologies with a focus on unitised regenerative fuel cells

3. Nano-size IrOx catalyst of high activity and stability in PEM water electrolyzer with ultra-low iridium loading