Influences of melt-draw ratio and annealing on the crystalline structure and orientation of poly(4-methyl-1-pentene) casting films-Reference-Cited by-同舟云学术

Influences of melt-draw ratio and annealing on the crystalline structure and orientation of poly(4-methyl-1-pentene) casting films

Published:2016 Issue:67 Volume:6 Page:62038-62044
ISSN:2046-2069
Container-title:RSC Advances
language:en
Short-container-title:RSC Adv.

Author:

Ma Ai-ping¹²³⁴⁵,Xu Li-yang¹²³⁴⁵,Yin Bo¹²³⁴⁵,Yang Ming-bo¹²³⁴⁵,Xie Bang-hu¹²³⁴⁵

Affiliation:

1. College of Polymer Science and Engineering

2. State Key Laboratory of Polymer Materials Engineering

3. Sichuan University

4. Chengdu

5. People’s Republic of China

Abstract

Poly(4-methyl-1-pentene) casting films with a row-nucleated lamellar structure were extruded through a slit die followed by stretching using a chill roll.

Publisher

Royal Society of Chemistry (RSC)

Subject

General Chemical Engineering,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2016/RA/C6RA08156H

Reference36 articles.

1. Poly(4-methyl-1-pentene)/alkylated graphene oxide nanocomposites: the emergence of a new crystal structure

2. Isothermal crystallization process of poly(4-methyl-1-pentene)/alkylated graphene oxide nanocomposites: thermal analysis and rheology study

3. Structural changes in the melt spinning, cold drawing, and annealing of poly(4-methylpentene-1) fibers

4. Gas permeability of poly(4-methylpentene-1) in a confined nanolayered film system

5. Microporous membranes of isotactic poly(4-methyl-1-pentene) from a melt-extrusion process. I. Effects of resin variables and extrusion conditions

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Cavitation behavior of poly(4‐methyl‐1‐pentene)/polypropylene/poly(4‐methyl‐1‐pentene) tri‐layer film: Influence of annealing and stretching temperature;Journal of Applied Polymer Science;2024-08-14

2. Prototyping in Polymethylpentene to Enable Oxygen-Permeable On-a-Chip Cell Culture and Organ-on-a-Chip Devices Suitable for Microscopy;Micromachines;2024-07-10

3. The effect of melt drawing ratio on the crystal structural change and performance of polyketone extrusion cast film;Journal of Polymer Science;2022-04-27

4. The effect of the melt-drawing ratio on the microstructure and mechanical properties of poly(butylene succinate) cast films with row-nucleated lamellar structure;Polymer Testing;2021-12

5. The crystallization and mechanical properties of poly(4-methyl-1-pentene) hard elastic film with different melt draw ratios;e-Polymers;2021-01-01