Preparation of a Ni<sub>3</sub>Sn<sub>2</sub> alloy-type anode embedded in carbon nanofibers by electrospinning for lithium-ion batteries-Reference-Cited by-同舟云学术

Preparation of a Ni₃Sn₂ alloy-type anode embedded in carbon nanofibers by electrospinning for lithium-ion batteries

Published:2022 Issue:43 Volume:12 Page:27899-27906
ISSN:2046-2069
Container-title:RSC Advances
language:en
Short-container-title:RSC Adv.

Author:

Ibadulla Nurbol¹^ORCID,Belgibayeva Ayaulym²^ORCID,Nurpeissova Arailym¹,Bakenov Zhumabay¹²^ORCID,Kalimuldina Gulnur³^ORCID

Affiliation:

1. National Laboratory Astana, Kabanbay Batyr Ave. 53, Nur-Sultan 010000, Kazakhstan

2. Department of Chemical and Materials Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Nur-Sultan 010000, Kazakhstan

3. Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Kabanbay Batyr Ave. 53, Nur-Sultan 010000, Kazakhstan

Abstract

Ni3Sn2 intermetallic alloy encapsulated in a carbon nanofiber matrix (Ni3Sn2@CNF) was obtained by electrospinning. The Ni3Sn2@CNF anode produced a high initial discharge capacity of ∼1300 mA h g−1, later retaining ∼350 mA h g−1 after 100 cycles.

Funder

Ministry of Defense and Aerospace Industry of the Republic of Kazakhstan

Nazarbayev University

Ministry of Education and Science of the Republic of Kazakhstan

Publisher

Royal Society of Chemistry (RSC)

Subject

General Chemical Engineering,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2022/RA/D2RA05734D

Reference30 articles.

1. Nanomaterials for Rechargeable Lithium Batteries