3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties-Reference-Cited by-同舟云学术

3D-printed barium titanate/poly-(vinylidene fluoride) nano-hybrids with anisotropic dielectric properties

Published:2017 Issue:47 Volume:5 Page:12430-12440
ISSN:2050-7526
Container-title:Journal of Materials Chemistry C
language:en
Short-container-title:J. Mater. Chem. C

Author:

Phatharapeetranun N.¹²³⁴⁵^ORCID,Ksapabutr B.⁴⁵⁶,Marani D.⁷⁸⁹^ORCID,Bowen J. R.¹²³^ORCID,Esposito V.¹²³^ORCID

Affiliation:

1. DTU Energy, Technical University of Denmark, Risø Campus

2. Roskilde

3. Denmark

4. Department of Materials Science and Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University

5. Nakornpathom

6. Thailand

7. Centro de Engenharia, Modelagem e Ciências Sociais Aplicadas, Universidade Federal do ABC Av. dos Estados 5001

8. Santo André (SP)

9. Brazil

Abstract

“3D-printed” anisotropy BTNFs/PVDF nanohybrids are successfully fabricated by the FDM technique which is attractive for developing novel functionalities in dielectric devices.

Funder

Danmarks Tekniske Universitet

Publisher

Royal Society of Chemistry (RSC)

Subject

Materials Chemistry,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2017/TC/C7TC03697C

Reference59 articles.

1. Flexible, Hybrid Piezoelectric Film (BaTi(1–x)ZrxO3)/PVDF Nanogenerator as a Self-Powered Fluid Velocity Sensor

2. Flexible Nanogenerator Based on Single BaTiO₃ Nanowire

3. Hemispherically Aggregated BaTiO3 Nanoparticle Composite Thin Film for High-Performance Flexible Piezoelectric Nanogenerator

4. PVDF–PZT nanocomposite film based self-charging power cell

5. High-dielectric-constant ceramic-powder polymer composites

Cited by 34 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Improving the Performance of Lead-Free Piezoelectric Composites by Using Polycrystalline Inclusions and Tuning the Dielectric Matrix Environment;SSRN Electronic Journal;2024

2. Multi-material and parameter-controllable stereolithography 3D printing of graded permittivity composites for high voltage insulators;Virtual and Physical Prototyping;2023-10-24

3. Design of Bioinspired Highly Aligned Bamboo-Mimetic Metamaterials With Structural and Functional Anisotropy;IEEE Transactions on Dielectrics and Electrical Insulation;2023-06

4. Fabrication, properties and applications of polymer composites additively manufactured with filler alignment control: A review;Composites Part B: Engineering;2023-05

5. An Overview of 3D-Printed Smart Polymers and Composites;Advances in Chemical and Materials Engineering;2023-02-17