A separator coated with commercial LiFePO<sub>4</sub> and conductive carbon for Li–S battery with good cycling performance-Reference-Cited by-同舟云学术

A separator coated with commercial LiFePO₄ and conductive carbon for Li–S battery with good cycling performance

Published:2023 Issue:37 Volume:11 Page:19870-19876
ISSN:2050-7488
Container-title:Journal of Materials Chemistry A
language:en
Short-container-title:J. Mater. Chem. A

Author:

Xia Shuang¹,Chen Zhichao¹,Yuan Lixuan¹,Song Jie¹,Zhou Qi¹,Yuan Xinhai¹,Liu Lili¹^ORCID,Fu Lijun¹^ORCID,Chen Yuhui¹^ORCID,Wu Yuping¹²^ORCID

Affiliation:

1. State Key Laboratory of Materials-Oriented Chemical Engineering, School of Energy Science and Engineering, Nanjing Tech University, Nanjing, Jiangsu, 211816, China

2. Confucius Energy Storage Lab, School of Energy and Environment, Southeast University, Nanjing, 210096, Jiangsu, China

Abstract

A prepared multifunctional separator for Li–S batteries shows no corrosions and lithium dendrites in after-cycling anodes, greatly suppressed ‘shuttle effect’, high utilization of active sulfur, and reduced charge transfer resistance, and high-performance Li–S batteries are achieved.

Funder

National Key Research and Development Program of China

Natural Science Foundation of Jiangsu Province

Publisher

Royal Society of Chemistry (RSC)

Subject

General Materials Science,Renewable Energy, Sustainability and the Environment,General Chemistry

Link

http://pubs.rsc.org/en/content/articlepdf/2023/TA/D3TA03527A

Reference49 articles.

1. A Large Scalable and Low‐Cost Sulfur/Nitrogen Dual‐Doped Hard Carbon as the Negative Electrode Material for High‐Performance Potassium‐Ion Batteries

2. Li ₄ Ti ₅ O ₁₂ Coating on Copper Foil as Ion Redistributor Layer for Stable Lithium Metal Anode