Effect of Metallic Inserts on the Strength of Pin Joints Prepared from Glass Fiber Reinforced Composites
-
Published:2017-09-19
Issue:5
Volume:67
Page:592
-
ISSN:0976-464X
-
Container-title:Defence Science Journal
-
language:
-
Short-container-title:Def. Sc. Jl.
Author:
Singh Kulwinder,Saini J. S.,Bhunia H.
Abstract
The present study deals with the failure analysis of pin joints by varying different geometric parameters i.e., edge distance to hole diameter (E/D) ratio and width to hole diameter (W/D) ratio. Pin joints were prepared from the glass fiber reinforced laminates incorporating the metal inserts. A range of 2 to 5 and 3 to 6 was considered for E/D and W/D ratios, respectively. The stress around the hole was redistributed by incorporating the metal inserts in the hole to increase the load carrying capacity. To predict the failure loads and failure modes numerically, progressive damage analysis along with Hashin failure criteria was used in the pin joints. Strength of the pin joints increased in the range of 65 per cent to 92 per cent with metal insert due to the redistribution of the stresses around the hole. Progressive damage analysis gave a good correlation with experimental findings. Thereafter, the strength of the joint was predicted by varying the thickness of the metal inserts.
Publisher
Defence Scientific Information and Documentation Centre
Subject
Electrical and Electronic Engineering,Computer Science Applications,General Physics and Astronomy,Mechanical Engineering,Biomedical Engineering,General Chemical Engineering
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献