Isotherm and kinetic studies of acid yellow 11 dye adsorption from wastewater using Pisum Sativum peels microporous activated carbon

Abstract

AbstractIn this study, Pea Peels-Activated Carbon (PPAC), a novel biochar, was created from leftover pea peels (Pisum sativum) by wet impregnation with ZnCl2 and subsequent heating to 600, 700, and 800 °C in a CO2 atmosphere. Investigated how the newly acquired biochar affected the capacity to extract the AY11 dye from the aqueous solution. Through the use of FTIR, XRD, SEM, BJH, BET, DSC, EDX, and TGA studies, the prepared PPAC was identified. It was found that a pH of 2 is optimum for the AY11 dye elimination. The highest removal percentage of AY11 dye was 99.10% using a beginning AY11 dye concentration of 100 mg/L and a 1.0 g/L dose of PPAC. The highest adsorption capacity (Qm) of the PPAC was 515.46 mg/g. Freundlich (FIM), Halsey (HIM), Langmuir (LIM), Tempkin (TIM), and Gineralize (GIM) isotherm models were useful in examining the adsorption results. A variety of error functions, including the average percent errors (APE), root mean square errors (RMS), Marquardt's percent standard deviation (MPSD), hybrid error function (HYBRID), Chi-square error (X2) and a sum of absolute errors (EABS) equations, were also applied to test the isotherm models data. The PPAC experimental data were best suited by the HIM and FIM isotherm models. Elovich (EM), Pseudo-first-order (PFOM), Intraparticle diffusion (IPDM), Pseudo-second-order (PSOM), and Film diffusion (FDM) models were applied to study the kinetic adsorption results. The PSOM had a strong correlation coefficient (R2 > 0.99), and it was principally responsible for controlling the adsorption rate. Anions are typically absorbed during the adsorption mechanism of AY11 dye by PPAC owing to attractive electrostatic forces created with an increase in positively charged areas at acidic pH levels. The regenerated PPAC was used in six successive adsorption/desorption cycles. This study's outcomes show that PPAC successfully removes the AY11 dye from the aqueous solution; as a result, PPAC can be used repeatedly without experiencing considerable loss in effectiveness.