Abstract
AbstractWe present a new technique for designing angle-sensing, long-wave infrared (LWIR) detectors. Angle detection in the proposed detector is achieved by measuring the ratio of the absorbed power in two closely-spaced, directive infrared antennas. Each directive LWIR antenna is in the form of a three-element Yagi-Uda array sharing a common reflector element with its neighbor. The structure of each antenna is optimized to act both as the collector of the infrared energy from the desired direction and as a distributed bolometer that senses the received radiation. The resistivity of each bolometer-antenna changes as a function of the absorbed power by the antenna. This change of resistance is sensed by biasing each antenna with a constant DC voltage and measuring the change of current passing through the antenna. Following this approach, by measuring the ratio of the resistance change in the two antennas, the angle of arrival of the LWIR signal can be determined. We present the design, fabrication, and measurement results of an angle-sensing detector optimized to operate at the wavelength of λ = 10.6 μm. The proposed detector has subwavelength dimensions occupying an aperture having dimensions of approximately 0.6 λ0 × 0.4λ0. The response of the detector was measured and shows the angle sensing dynamic range of 22 dB within the field of view of ±60°.
Funder
United States Department of Defense | United States Navy | Office of Naval Research
Publisher
Springer Science and Business Media LLC
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献