Stress monitoring capability of magnetostrictive Fe–Co fiber/glass fiber reinforced polymer composites under four-point bending

Abstract

AbstractMany structural health monitoring (SHM) techniques have been investigated for damage detection in woven glass fiber reinforced polymer (GFRP) laminates. Recently, the GFRP composites integrated with sensors have received attention because the composite material can transmit information about the structural condition during operation. Magnetostrictive materials are considered as feasible candidates to realize the contactless SHM techniques by exploiting the Villari effect, but the theoretical modeling to correlate a magnetostrictive response with structural conditions is a critical issue. In this study, the analytical procedure considering the mechanics of materials and electromagnetism was proposed to model the magnetic induction by the Villari effect of magnetostrictive GFRP laminates under bending. The magnetostrictive Fe–Co fiber/GFRP composites were then developed, and the four-point bending tests were carried out to evaluate the fabricated composites’ stress monitoring capability. The magnetic flux density behavior corresponded to the bending stress fluctuation. The maximum magnetic flux density change was 70.7 mT subjected to the peak bending stress of 158 MPa. The analytical solutions showed reasonable agreement with the experimental results. The applied stress and measured magnetic flux density were correlated by the theoretical models. Thus, these results suggest an important step in realizing the novel contactless SHM technique utilizing magnetostrictive materials.