Experimental measurements and modelling of viscosity and density of calcium and potassium chlorides ternary solutions

Abstract

AbstractMeasured viscosity and density data for ternary aqueous solutions of CaCl2 and KCl are presented at temperatures between 293 and 323 K with 5 K increment. A modified Jones–Dole was introduced by adding extra terms and proved to be suitable for modelling of the viscosity data. Goldsack and Franchetto, Hu and Exponential models are used to correlate the viscosity data, too. Al models are correlated as a function of temperature and concentration. All models had successfully predicted the viscosity with high precision reaching a maximum average absolute deviation (AAD) of less than 2.3%. The modified Jones–Dole showed the best results among other models. Viscosity of the ternary solution is higher than the viscosity of water by about 15% at low concentrations and reaches about 270% at the highest concentrations. The amount of CaCl2 has more significant effect on the ternary mixture viscosity compared to KCl. This has created difficulty in measuring the viscosity and consequently the challenge in finding the different models parameters. Ternary solution densities were successfully correlate with Kumar’s model with AAD of less than 0.4%. Comparison of the ternary solution density and viscosity with the few available data literature showed a good agreement.