Parallel MR image reconstruction based on triple cycle optimization

Abstract

AbstractThe self-calibration parallel imaging (SC-SENSE) method reconstructs the image by estimating the coil sensitivity matrix. In order to obtain the sensitivity matrix, it is necessary to take a small amount of automatic calibration signal lines (ACSL) in the center of k-space. This method uses the data of the central region to obtain the sensitivity matrix, and then the reconstructed image is obtained. This paper proposed the triple cycle optimization (TCO) method to continuously optimize reconstructed images. The proposed TCO method takes the sensitivity matrix obtained by ACSL and substituted the reconstructed image as the initial data generation into the loop, and estimates the k-space data repeatedly. A new sensitivity matrix is obtained by using k-space data and the reconstructed image, and a stable triple cycle is obtained. In the cycle, all data are optimized to a certain extent, including the reconstructed image. Experimental results show that under the same sampling density, images reconstructed by using the triple cycle optimization method have lower noise and artifacts than those of the traditional method. When combined with the variable density sampling method, the effect is remarkable with a much low sampling rate.