Assessment of metal extraction from e-waste using supported IL membrane with reliable comparison between RSM regression and ANN framework

Abstract

AbstractRecently, efficient techniques to remove indium ions from e-waste have been described due to their critical application. This paper illustrates the recovery of indium ions from an aqueous solution using a liquid membrane. CyphosIL 104 described the excellent potential for the extraction of indium ions. Evaluation of the five process parameters, such as indium concentration (10–100 mg/L), carrier concentration (0.05–0.2 mol/L), feed phase acidity (0.01–3 mol/L), chloride ion concentration (0.5–4 mol/L) and the stripping agent concentration (0.1–5 mol/L) were conducted. The interactive impacts of the various parameters on the extraction efficiency were investigated. The response surface methodology (RSM) and artificial neural network (ANN) were employed to model and compare the FS-SLM process results. RSM model with a quadratic equation (R2 = 0.9589) was the most suitable model for describing the efficiency. ANN model with six neurons showed a prediction of extraction efficiency with R2 = 0.9860. The best-optimized data were: 73.92 mg/L, 0.157 mol/L, 1.386 mol/L, 2.99 mol/L, and 3.06 mol/L for indium concentration, carrier concentration, feed phase acidity, chloride ion concentration, and stripping agent concentration. The results achieved by RSM and ANN led to an experimentally determined extraction efficiency of 93.91%, and 94.85%, respectively. It was close to the experimental data in the optimization condition (95.77%). Also, the evaluation shows that the ANN model has a better prediction and fitting ability to reach outcomes than the RSM model.