Abstract
AbstractFor the shallow and circular silo (SCS), when the aspect ratio is between 1.0 and 1.5, the lateral pressure especially dynamic pressure may cause destruction if the size of the silo is large. This paper proposed a modified calculation method of lateral pressure on the silo wall of SCS, considering the elasticities of silo wall and storage materials. The availability of shallow silo and deep silo methods, and the modified method were compared with the experiment and simulation. The results show that the Rankine’s formula is too conservative for the static lateral pressure, and the results of the modified method and Janssen formula are close to that of the experimental and simulation. For the dynamic lateral pressure calculation, Rankine theory is unsafe for the discharging load. The relative error of the dynamic lateral pressure based on Janssen theory is between 20 and 30%, which is too large. The dynamic lateral pressure calculated by the modified method is in good agreement with that of the experimental and simulation, and the relative error is less than 10%. Therefore, the modified method of lateral pressure formula is reasonable, which can provide guidance for the safety design of silo structure.
Funder
Henan University of Technology
National Natural Science Foundation of China
Publisher
Springer Science and Business Media LLC
Reference39 articles.
1. Chen, Y. Y., Liang, C., Wang, X. & Guo, X. Q. Static pressure distribution characteristics of powders stored in silos. Chem. Eng. Res. Des. 154(5), 1–10 (2020).
2. Guo, J., Roberts, A. W. & Prigge, J. D. Experimental investigation of wall pressure and arching behavior under surcharge pressure in mass-flow hoppers. Powder Technol. 258(5), 272–284 (2014).
3. Couto, A., Ruiz, A. & Aguado, P. J. Experimental study of the pressures exerted by wheat stored in slender cylindrical silos, varying the flow rate of material during discharge. Comparison with Eurocode 1 part 4. Powder Technol. 237, 450–467 (2013).
4. Ding, S., Li, H., Ooi, J. Y. & Rotte, J. M. Prediction of flow patterns during silo discharges using a finite element approach and its preliminary experimental verification. Particuology. 18(2), 42–49 (2015).
5. Mathews, J. C. & Wu, W. Model tests of silo discharge in a geotechnical centrifuge. Powder Technol. 293(5), 3–14 (2016).
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献