Author:
Kim Yeonggeun,Kim Jongbeom,Ahn Joongho,Han Moongyu,Lim Hae Gyun,Lee Ki Jong,Lee Juseung,Kim Chulhong,Kim Hyung Ham
Abstract
AbstractWith the increasing need for steel sheet quality assurance, the detection of micro-scaled inclusions in steel sheets has become critical. Many techniques have been explored to detect inclusions, e.g., visual inspection, radiography, magnetic testing, and ultrasound. Among these methods, ultrasound (US) is the most commonly used non-destructive testing (NDT) method due to its ease of use and deep penetration depth. However, ultrasound currently cannot be used for detecting the micro-scaled inclusions due to low spatial resolution, e.g., less than 30 μm, which are the key important factors causing the cracks in the high-quality steel sheets. Here, we demonstrate a high-resolution US imaging (USI) using high-frequency US transducers to image micro inclusions in steel sheets. Our system utilizes through-transmission USI and identifies ultrasound scattering produced by the inclusions. We first ultrasonically imaged the artificial flaws induced by the laser on the steel sheet surface for validating the system. We then imaged the real inclusions in the steel sheets formed during manufacturing processes and analyzed them to derive quantitative parameters related to the number of micro-scaled inclusions. Our results confirm that inclusions less than 30 μm can be identified using our high-resolution USI modality and has the potential to be used as an effective tool for quality assurance of the steel sheets.
Funder
National Research Foundation of Korea
POSCO
BK21 FOUR project
Publisher
Springer Science and Business Media LLC
Reference36 articles.
1. Tisza, M. Engineering Steels and High Entropy-Alloys (IntechOpen, 2020).
2. Chen, C., Jiang, Z., Li, Y., Sun, M., Wang, Q., Chen, K., & Li, H. State of the Art in the Control of Inclusions in Spring Steel for Automobile-a Review. ISIJ International, ISIJINT-2019-2513 (2019).
3. Yamazaki, T. et al. (Google Patents, 2013).
4. Balachandran, G. Challenges in Special Steel Making. IOP Conference Series: Materials Science and Engineering, 314, 1. IOP Publishing (2018).
5. Zhang, L. & Thomas, B. G. State of the art in the control of inclusions during steel ingot casting. Metall. Mater. Trans. B. 37, 733–761. https://doi.org/10.1007/s11663-006-0057-0 (2006).
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献