Evaluating the effect of unidirectional loading on the piezoresistive characteristics of carbon nanoparticles

Abstract

AbstractThe piezoresistive effect of materials can be adopted for a plethora of sensing applications, including force sensors, structural health monitoring, motion detection in fabrics and wearable, etc. Although metals are the most widely adopted material for sensors due to their reliability and affordability, they are significantly affected by temperature. This work examines the piezoresistive performance of carbon nanoparticle (CNP) bulk powders and discusses their potential applications based on strain-induced changes in their resistance and displacement. The experimental results are correlated with the characteristics of the nanoparticles, namely, dimensionality and structure. This report comprehensively characterizes the piezoresistive behavior of carbon black (CB), onion-like carbon (OLC), carbon nanohorns (CNH), carbon nanotubes (CNT), dispersed carbon nanotubes (CNT-D), graphite flakes (GF), and graphene nanoplatelets (GNP). The characterization includes assessment of the ohmic range, load-dependent electrical resistance and displacement tracking, a modified gauge factor for bulk powders, and morphological evaluation of the CNP. Two-dimensional nanostructures exhibit promising results for low loads due to their constant compression-to-displacement relationship. Additionally, GF could also be used for high load applications. OLC’s compression-to-displacement relationship fluctuates, however, for high load it tends to stabilize. CNH could be applicable for both low and high loading conditions since its compression-to-displacement relationship fluctuates in the mid-load range. CB and CNT show the most promising results, as demonstrated by their linear load-resistance curves (logarithmic scale) and constant compression-to-displacement relationship. The dispersion process for CNT is unnecessary, as smaller agglomerates cause fluctuations in their compression-to-displacement relationship with negligible influence on its electrical performance.