Author:
Zhang Yan,Chen YanKun,Zhou JianPing,Sun DaQian,Li HongMei
Abstract
AbstractIn this paper, laser welding-brazing of TC4 Titanium (Ti) alloy and Al2O3 ceramic dissimilar material was carried. The results showed that the Ti alloy and Al2O3 were joined by melting filler metal when the laser was concentrated in the Ti alloy side of the joint. The joint with one fusion weld and one brazed weld separated by remaining unmelted Ti alloy. Laser beam offset the Ti alloy 1.5 mm, Ti alloy would not be completely melted in joint. Through heat conduction, the filler metal melted occurred at the Ti-ceramic interface. A brazed weld was formed at the Ti-ceramic interface with the main microstructure of β-CuZn + Ti2Zn3, β-CuZn and Al2Cu + β-CuZn. The joint fractured at the brazed weld with the maximum tensile strength of 169 MPa.
Publisher
Springer Science and Business Media LLC
Reference23 articles.
1. Bai, J. G., Yang, X. H., Xu, S. C., Shi, Y. G. & Yang, J. F. Fabrication of highly dense Al2O3 ceramics. Scr. Mater. 68, 393–395 (2013).
2. Ning, H. L. et al. Joining of sapphire and hot pressed Al2O3 using Ag70.5Cu27.5Ti2 brazing filler metal. Ceram. Int. 29, 689–694 (2003).
3. Rohde, M., Südmeyer, I., Urbanek, A. & Torge, M. Joining of alumina and steel by a laser supported brazing process. Ceram. Int. 35, 333–337 (2009).
4. Liu, Y. N. et al. Microstructure and properties of ln-situ TiC/TiNi composite coating prepared via laser cladding on titanium alloy. Chin. J. Lasers 48, 115–125 (2021).
5. Liu, C. T., Schneibel, J. H., Maziasz, P. J., Wright, J. L. & Easton, D. S. Tensile properties and fracture toughness of TiAl alloys with controlled microstructures. Intermetallics 4, 429–440 (1996).
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献