A new stiffness-sensing test to measure damage evolution in solids

Abstract

AbstractWe propose and assess a procedure to measure the damage evolution in solids as a function of the applied strain, by conducting stiffness-sensing mechanical tests. These tests consist in superimposing to a monotonically increasing applied strain numerous, low-amplitude unloading/reloading cycles, and extracting the current stiffness of the specimens from the slope of the stress–strain curve in each of the unloading/reloading cycles. The technique is applied to a set of polymeric and metallic solids with a wide range of stiffness, including CFRP laminates loaded through the thickness, epoxy resins, injection-moulded and 3D printed PLA and sintered Ti powders. The tests reveal that, for all the materials tested, damage starts developing at the very early stages of deformation, during what is commonly considered an elastic response. We show that the test method is effective and allows enriching the data extracted from conventional mechanical tests, for potential use in data-driven constitutive models. We also show that the measurements are consistent with the results of acoustic and resistive measurements, and that the method can be used to quantify the viscous response of the materials tested.