Author:
Wang Weishu,Li Shuailong,Zhen Juan,Guo Jiawei,Xu Weihui
Abstract
AbstractThe sinter cooler, essential for cooling hot sintered ore to a specific temperature, has seen recent advancements with the introduction of a vertical sinter cooling furnace. This innovation aims to enhance energy efficiency, reduce emissions, and improve waste heat recovery. Despite significant research, a quantitative analysis of factors impacting its cooling and heat transfer efficiency is lacking. This study utilizes the Euler model and local non-equilibrium thermodynamic theory to identify key factors affecting the gas–solid cooperative cooling process in the vertical cooler. Through an orthogonal experimental approach, the paper determines the optimal structural and operational parameters for the furnace. Key findings include that a gas–solid ratio of 1200m^3/t, inlet air temperature of 50 ℃, cooling section height of 6m, and diameter of 13.25m maximize efficiency, achieving a weighted range normalization value of 0.962. This configuration meets sintered ore cooling requirements while optimizing waste heat recovery. The study reveals that the impact on heat transfer efficiency is influenced primarily by the gas–solid ratio, followed by the cooling section's height, diameter, and inlet air temperature. These insights are crucial for enhancing the vertical sinter cooler's design, contributing to more energy-efficient and environmentally friendly sintering processes.
Funder
Innovative Research Team (in Science and Technology) at the University of Henan Province
Publisher
Springer Science and Business Media LLC
Reference23 articles.
1. Zhang, S. Study on Flow and Heat Transfer Characteristics in the Sinter Vertical Cooling Process (School of Energy and Environmental Engineering University of Science and Technology Beijing, 2021).
2. Cai, J., Dong, H. The method and device of sintering waste heat recovery and utilization with vertical tank: 200910187381.8 (2009).
3. Dong, H. et al. Experimental investigation on the drying process of the sinter mixture. Powder Technol. 218(2), 1–4 (2012).
4. Hui, D. et al. Leakage of sintering-cooling system. Iron Steel 47(1), 95–99 (2012).
5. Huijun, F. et al. Constructal optimization of a sinter cooling process based on exergy output maximization. Appl. Therm. Eng. 96(3), 161–166 (2016).