Exploiting nonlinearities through geometric engineering to enhance the auxetic behaviour in re-entrant honeycomb metamaterials

Abstract

AbstractClassical approaches to enhance auxeticity quite often involve exploring or designing newer architectures. In this work, simple geometrical features at the member level are engineered to exploit non-classical nonlinearities and improve the auxetic behaviour. The structural elements of the auxetic unit cell are here represented by thin strip-like beams, or thin-walled tubular beams. The resulting nonlinear stiffness enhances the auxeticity of the lattices, especially under large deformations. To quantify the influence of the proposed structural features on the resulting Poisson’s ratio, we use here variational asymptotic method (VAM) and geometrically exact beam theory. The numerical examples reveal that 2D re-entrant type micro-structures made of thin strips exhibit an improvement in terms of auxetic behaviour under compression. For the auxetic unit cell with thin circular tubes as members, Brazier’s effect associated with cross-sectional ovalisation improves the auxetic behaviour under tension; the enhancement is even more significant for the 3D re-entrant geometry. Thin strip-based auxetic unit cells were additively manufactured and tested under compression to verify the numerical observations. The experimentally measured values of the negative Poisson’s ratio are in close agreement with the numerical results, revealing a 66% increase due to the nonlinearity. Simulation results showcase these alternative approaches to improve the auxetic behaviour through simple geometric engineering of the lattice ribs.