Monolithic 3D integration of back-end compatible 2D material FET on Si FinFET

Abstract

AbstractThe performance enhancement of integrated circuits relying on dimension scaling (i.e., following Moore’s Law) is more and more challenging owing to the physical limit of Si materials. Monolithic three-dimensional (M3D) integration has been considered as a powerful scheme to further boost up the system performance. Two-dimensional (2D) materials such as MoS2 are potential building blocks for constructing upper-tier transistors owing to their high mobility, atomic thickness, and back-end-of-line (BEOL) compatible processes. The concept to integrate 2D material-based devices with Si field-effect transistor (FET) is technologically important but the compatibility is yet to be experimentally demonstrated. Here, we successfully integrated an n-type monolayer MoS2 FET on a p-type Si fin-shaped FET with 20 nm fin width via an M3D integration technique to form a complementary inverter. The integration was enabled by deliberately adopting industrially matured techniques, such as chemical mechanical planarization and e-beam evaporation, to ensure its compatibility with the existing 3D integrated circuit process and the semiconductor industry in general. The 2D FET is fabricated using low-temperature sequential processes to avoid the degradation of lower-tier Si devices. The MoS2 n-FETs and Si p-FinFETs display symmetrical transfer characteristics and the resulting 3D complementary metal-oxide-semiconductor inverter show a voltage transfer characteristic with a maximum gain of ~38. This work clearly proves the integration compatibility of 2D materials with Si-based devices, encouraging the further development of monolithic 3D integrated circuits.