Understanding the effect of microstructure and composition on localized corrosion susceptibility of 6xxx aluminum alloys

Abstract

AbstractThe corrosion performance of 6xxx series Al alloys has been found to depend on small changes in composition and microstructure. The corrosion behaviors of three aluminum alloys, AA6111, AA6451, and AA6016, were investigated. AA6111, containing primarily α (Al15 (Fe,Mn)3Si2) intermetallic particles (IMPs), and AA6016, containing primarily β (Al8Fe2Si) IMPs, exhibited the best and the worst overall corrosion performances, respectively, as indicated by the extent of corrosion in exposure tests. However, this ranking was not predicted by the standard interpretation of potentiodynamic polarization curves measured on the alloys. The corrosion susceptibilities of the three alloys were further investigated by evaluating the electrochemical behavior of the component phases separately. Bulk analogs of the component phases were fabricated using standard alloy casting techniques. The fabricated bulk analogs of α and β IMPs, as well as the three alloy matrix phases, were tested using either macrocell or microcell testing. An explanation for the alloy performances was developed by combining the behavior of the component phases.