A New Closed Loop Constant v/f Control of Induction Motor with Torque Control Based on DPWM-Reference-Cited by-同舟云学术

A New Closed Loop Constant v/f Control of Induction Motor with Torque Control Based on DPWM

Published:2023-07-10 Issue:3 Volume:11 Page:652-657
ISSN:2347-470X
Container-title:International Journal of Electrical and Electronics Research
language:en
Short-container-title:IJEER

Author:

Nandhini E.¹,Sivaprakasam A.²

Affiliation:

1. Research Scholar, College of Engineering Guindy, Anna University, Chennai, India

2. Associate Professor, College of Engineering Guindy, Anna University, Chennai, India

Abstract

An easy sensor-less scalar control algorithm is described in this article as a method for controlling the speed of an induction motor. For developing a closed-loop v/f control of the induction motor drive, a torque controller with PI is implemented. The torque command was estimated by utilizing the voltage command, the feedback current, and a torque estimator. Additionally, a torque reference was provided for the Torque PI controller. Considering this, the purpose of this work is to investigate the closed-loop PI-based torque control of an induction motor drive that applies DPWM. In addition to this, it provides a description of a PI-based closed-loop torque control that works in conjunction with v/f control and tries to discover the most effective method for driving an induction motor based on an examination of Total Harmonic Distortion (THD) and torque ripple. To evaluate the performance studies of open- and closed-loop strategies with DPWM techniques for induction motor driving, the MATLAB/Simulink environment has been deployed. Experimental results have been validated.

Publisher

FOREX Publication

Subject

Electrical and Electronic Engineering,Engineering (miscellaneous)

Reference32 articles.

1. A. Goedtel, I. N. da Silva, and P. J. A. Serni, “Load torque identification in induction motor using neural networks technique,” Elect. Power Syst. Res., vol. 77, no. 1, pp. 35–45, Jan. 2007.

2. B. Lu, T. G. Habetler, and R. G. Harley, “A survey of efficiency-estimation methods for in-service induction motors,” IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 924–933, Jul./Aug. 2006.

3. D. Shi, P. J. Unsworth, and R. X. Gao, “Sensor less speed measurement of induction motor using Hilbert transform and interpolated fast Fourier transform,” IEEE Trans. Instrum. Meas., vol. 55, no. 1, pp. 290–299, Feb. 2006.

4. S. Maiti, C. Chakraborty, Y. Hori, and M. C. Ta, “Model reference adaptive controller-based rotor resistance and speed estimation techniques for vector-controlled induction motor drive utilizing reactive power,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 594–601, 2008. 760 IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 58, NO. 3, MARCH 2011.

5. B. Singh, G. Bhuvaneswari, and B. Garg, “Harmonic mitigation in AC–DC converters for vector-controlled induction motor drives,” IEEE Trans. Energy Convers., vol. 22, no. 3, pp. 637–646, Sep. 2007.