Porous TiO<sub>2–<i>x</i></sub>/C Nanofibers with Axially Aligned Tunnel Pores as Effective Sulfur Hosts for Stabilized Lithium–Sulfur Batteries-Reference-Cited by-同舟云学术

Porous TiO_2–x/C Nanofibers with Axially Aligned Tunnel Pores as Effective Sulfur Hosts for Stabilized Lithium–Sulfur Batteries

Published:2022-12-06 Issue:49 Volume:14 Page:54725-54735
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Liu Mengting¹²^ORCID,Jhulki Samik²^ORCID,Magasinski Alexandre²,Wang Peng-Fei¹^ORCID,Yushin Gleb²^ORCID

Affiliation:

1. State Key Laboratory of Electrical Insulation and Power Equipment, Center of Nanomaterials for Renewable Energy, School of Electrical Engineering, Xi’an Jiaotong University, Xi’an710049, China

2. School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, Georgia30332, United States

Funder

Army Research Office

China Postdoctoral Science Foundation

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.2c16578

Reference49 articles.

1. Review on Li-Sulfur Battery Systems: an Integral Perspective

2. More Reliable Lithium-Sulfur Batteries: Status, Solutions and Prospects

3. Conversion cathodes for rechargeable lithium and lithium-ion batteries

4. Adsorption‐Catalysis Design in the Lithium‐Sulfur Battery

5. Review—The Importance of Chemical Interactions between Sulfur Host Materials and Lithium Polysulfides for Advanced Lithium-Sulfur Batteries

Cited by 13 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. From one-dimensional to three-dimensional, the criss-crossed fiber materials forge high-performance lithium-sulfur batteries;Chemical Engineering Journal;2024-09

2. Partially oxidized Ti3–Nb C2T MXene nanosheets as efficient sulfur hosts and separator modification for Li–S batteries;Journal of Materiomics;2024-07

3. Advances in fibrous materials for high-capacity lithium sulfur batteries;Nano Energy;2024-04

4. The introduction of metallic Cu onto mixed-phase TiO2 to realize in-situ capture, conversion, and reuse of lithium polysulfides for Li-S batteries;Journal of Alloys and Compounds;2024-03

5. Preparation and temperature regulation properties of TiO2/CNTs-based form-stable phase change materials;Colloids and Surfaces A: Physicochemical and Engineering Aspects;2024-03