Friend or Foe? Revising the Role of Oxygen in the Tribological Performance of Solid Lubricant MoS<sub>2</sub>-Reference-Cited by-同舟云学术

Friend or Foe? Revising the Role of Oxygen in the Tribological Performance of Solid Lubricant MoS₂

Published:2022-12-05 Issue:49 Volume:14 Page:55051-55061
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Bondarev Andrey¹^ORCID,Ponomarev Ilia¹^ORCID,Muydinov Ruslan²,Polcar Tomas¹

Affiliation:

1. Department of Control Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Technicka 2, 16627 Prague 6, Czech Republic

2. Institute of High-Frequency and Semiconductor System Technologies, Technical University Berlin, Einsteinufer 25, 10587 Berlin, Germany

Funder

Technology Agency of the Czech Republic

Ministerstvo ?kolstv?, Ml?de?e a Telov?chovy

Austrian Science Fund

Grantov? Agentura Cesk? Republiky

Centrum pokrocil?ch aplikovan?ch pr?rodn?ch ved

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.2c15706

Reference84 articles.

1. Nanoscale Transition Metal Dichalcogenides: Structures, Properties, and Applications

2. Superlubricity of MoS2: crystal orientation mechanisms

3. Superlubricity between MoS2 Monolayers

4. Tribology of two-dimensional materials: From mechanisms to modulating strategies

5. Temperature-Adaptive Ultralubricity of a WS2/a-C Nanocomposite Coating: Performance from Room Temperature up to 500 °C

Cited by 17 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Mechanical properties and tribological behavior of hard phase doped Pb/MoS2 composite films;Vacuum;2024-11

2. Improved tribological properties of W-S-C-N film contributed by the friction-induced well crystallized thick transfer layer;Tribology International;2024-10

3. Cross-linked ZnAl-LDH/PEDOT:PSS/MoS2 coating in-situ grown on aluminum alloy for excellent protection against both corrosion and wear;Surfaces and Interfaces;2024-08

4. A comparative analysis of compressive and wear failure of laser-powder bed fused Stainless Steel 316L produced with different hatch spacing in stripe and contour patterns;Engineering Failure Analysis;2024-08

5. Friction and wear performance of aluminum-based self-lubricating materials derived from the 3D printed graphite skeletons with different morphologies and orientations;Tribology International;2024-07