3D-Printed Anti-Fouling Cellulose Mesh for Highly Efficient Oil/Water Separation Applications-Reference-Cited by-同舟云学术

3D-Printed Anti-Fouling Cellulose Mesh for Highly Efficient Oil/Water Separation Applications

Published:2019-03-18 Issue:14 Volume:11 Page:13787-13795
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Koh J. Justin¹²,Lim Gwendolyn J.H.¹,Zhou Xin¹^ORCID,Zhang Xiwen²,Ding Jun¹,He Chaobin¹³^ORCID

Affiliation:

1. Department of Materials Science and Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117575

2. Singapore Institute of Manufacturing Technology, Agency for Science, Technology and Research (A*STAR), 73 Nanyang Drive, Singapore 637662

3. Institute of Materials Research and Engineering, Agency for Science, Technology, and Research (A*STAR), 2 Fusionopolis Way, Innovis, Singapore 138634

Funder

Natural Fibre Composites Laboratory, Singapore Institute of Manufacturing Technology

Natural Fibre Composites Laboratory, National University of Singapore

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.9b01753

Reference41 articles.

1. Oil/water separation techniques: a review of recent progresses and future directions

2. A high-level synthesis of oil spill response equipment and countermeasures

3. Sugar-Derived Phase-Selective Molecular Gelators as Model Solidifiers for Oil Spills

4. Underwater Oil Capture by a Three-Dimensional Network Architectured Organosilane Surface

5. Rapid Removal of Organics and Oil Spills from Waters Using Silicone Rubber “Sponges”

Cited by 120 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Double-layered cellulosic interfacial evaporator via upcycling of waste cotton fabrics for efficient solar desalination;Separation and Purification Technology;2024-12

2. An overview of cellulose aerogels and foams for oil sorption: Preparation, modification, and potential of 3D printing;Carbohydrate Polymers;2024-11

3. The robust design of recyclable stainless steel mesh-reinforce FEP composite membrane for the purification of emulsion;Journal of the Taiwan Institute of Chemical Engineers;2024-10

4. Design and fabrication of PPTA-braid-reinforced PFA/GE hollow fiber composite membranes;Journal of Environmental Chemical Engineering;2024-10

5. Crosslinking strategy and promotion role of cellulose as a composite hydrogel component for three-dimensional printing – A review;Food Hydrocolloids;2024-09