Probing Ink–Powder Interactions during 3D Binder Jet Printing Using Time-Resolved X-ray Imaging-Reference-Cited by-同舟云学术

Probing Ink–Powder Interactions during 3D Binder Jet Printing Using Time-Resolved X-ray Imaging

Published:2020-06-22 Issue:30 Volume:12 Page:34254-34264
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Barui Srimanta¹²,Ding Hui¹,Wang Zixin¹,Zhao Hu¹,Marathe Shashidhara³,Mirihanage Wajira¹,Basu Bikramjit²^ORCID,Derby Brian¹^ORCID

Affiliation:

1. Department of Materials, University of Manchester, Oxford Road, Manchester M13 9PL, U.K.

2. Laboratory for Biomaterials and Translational Center on Biomaterials for Orthopedic and Dental Applications, Materials Research Centre, Indian Institute of Science, Bangalore 560012, India

3. Diamond Light Source, Didcot OX11 0DE, U.K.

Funder

Engineering and Physical Sciences Research Council

Department of Biotechnology , Ministry of Science and Technology

Commonwealth Scholarship Commission

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

http://pubs.acs.org/doi/pdf/10.1021/acsami.0c03572

Reference47 articles.

1. Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

2. Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds

3. Inkjet printing ceramics: From drops to solid

4. Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis

5. Probing the influence of post-processing on microstructure and in situ compression failure with in silico modeling of 3D-printed scaffolds

Cited by 36 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Dynamic Drop Penetration of Horizontally Oriented Fiber Arrays;Langmuir;2024-06-12

2. Enhancing Quality Control: Image-Based Quantification of Carbides and Defect Remediation in Binder Jetting Additive Manufacturing;Materials;2024-05-07

3. Prediction of the penetration depth of particle-loaded inks in binder jetting;Progress in Additive Manufacturing;2024-05-06

4. Experimental evaluation of binder infiltration depth and axial overlap to control properties of green parts produced by Binder Jetting;Additive Manufacturing;2024-05

5. Location dependency of green density and dimension variation in binder jetted parts;The International Journal of Advanced Manufacturing Technology;2024-04-05