Fabrication of Well-Ordered Three-Phase Boundary with Nanostructure Pore Array for Mixed Potential-Type Zirconia-Based NO2 Sensor-Reference-Cited by-同舟云学术

Fabrication of Well-Ordered Three-Phase Boundary with Nanostructure Pore Array for Mixed Potential-Type Zirconia-Based NO2 Sensor

Published:2016-06-23 Issue:26 Volume:8 Page:16752-16760
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Wang Bin¹,Liu Fangmeng¹,Yang Xue¹,Guan Yehui¹,Ma Ce¹,Hao Xidong¹,Liang Xishuang²¹,Liu Fengmin¹,Sun Peng¹,Zhang Tong¹,Lu Geyu²¹

Affiliation:

1. State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, 2699 Qianjin Street, Changchun, Jilin 130012, China

2. State Key Laboratory of Automotive Simulation and Control, Jilin University, 5988 Renmin Avenue, Changchun, Jilin 130012, China

Funder

Ministry of Education of the People's Republic of China

Ministry of Science and Technology of the People's Republic of China

National Natural Science Foundation of China

Jilin Province

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.6b04219

Reference44 articles.

1. High-temperature potentiometric/amperometric NOx sensors combining stabilized zirconia with mixed-metal oxide electrode

2. Development of zirconia-based potentiometric NOx sensors for automotive and energy industries in the early 21st century: What are the prospects for sensors?

3. High-temperature sensors for NO and NO2 based on stabilized zirconiaand spinel-type oxide electrodes

4. Mixed potential NH3 sensor based on Mg-doped lanthanum silicate oxyapatite

5. Effects of sintering temperature on the NH3 sensing properties of Mg2Cu0.25Fe1O3.75 electrode for YSZ-based potentiometric NH3 sensor

Cited by 45 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. YSZ-based mixed-potential acetone sensor with LaBaCo2O5+δ sensitive electrode for diabetic diagnosis;Sensors and Actuators B: Chemical;2024-11

2. An amperometric high-temperature ammonia sensor based on a BaCo0.4Fe0.4Zr0.1Y0.1O3-δ triple conductor;Sensors and Actuators B: Chemical;2024-09

3. Modification strategies for semiconductor metal oxide nanomaterials applied to chemiresistive NOx gas sensors: A review;Talanta;2024-06

4. Improving response performance of impedimetric NO2 sensor using NiO-YSZ mixed conductor porous layer;Sensors and Actuators B: Chemical;2024-02

5. Selective detection of NO using the perovskite-type oxide LaMO₃ (M = Cr, Mn, Fe, Co, and Ni) as the electrode material for yttrium-stabilized zirconia-based electrochemical sensors;Journal of Materials Chemistry A;2024