Three-Dimensional Printing of Triboelectric Nanogenerators by Digital Light Processing Technique for Mechanical Energy Harvesting-Reference-Cited by-同舟云学术

Three-Dimensional Printing of Triboelectric Nanogenerators by Digital Light Processing Technique for Mechanical Energy Harvesting

Published:2023-11-09 Issue:46 Volume:15 Page:53974-53983
ISSN:1944-8244
Container-title:ACS Applied Materials & Interfaces
language:en
Short-container-title:ACS Appl. Mater. Interfaces

Author:

Chiappone Annalisa¹^ORCID,Roppolo Ignazio²³^ORCID,Scavino Edoardo²,Mogli Giorgio²,Pirri Candido Fabrizio²³,Stassi Stefano²^ORCID

Affiliation:

1. Department of Chemical and Geological Sciences, Università degli studi di Cagliari, Cittadella Universitaria Blocco D, S.S. 554 bivio per Sestu, Monserrato, CA 09042, Italy

2. Department of Applied Science and Technology, Politecnico di Torino, C.so Duca degli Abruzzi 24, Turin 10129, Italy

3. Center for Sustainable Future Technologies @Polito, Istituto Italiano di Tecnologia, Via Livorno, 60, Turin 10144, Italy

Funder

Ministero dell'Universit? e della Ricerca

Publisher

American Chemical Society (ACS)

Subject

General Materials Science

Link

https://pubs.acs.org/doi/pdf/10.1021/acsami.3c13323

Reference58 articles.

1. Assessment of energy storage technologies: A review

2. Is a 100% renewable European power system feasible by 2050?

3. Textile-Based Triboelectric Nanogenerators for Self-Powered Wearable Electronics

4. Stretchable, Transparent, and Thermally Stable Triboelectric Nanogenerators Based on Solvent‐Free Ion‐Conducting Elastomer Electrodes

5. High output triboelectric nanogenerator based on scotch tape for self-powered flexible electrics

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Van der Waals interactions enhanced multiple-times all-waste-recycled triboelectric nanogenerator for ultra-high lifetime stability;Nano Energy;2024-11

2. Three-dimensional triboelectric nanogenerator manufacturing using water transfer printing;Chemical Engineering Journal;2024-08

3. Highly stretchable, 3D printable ionically conductive organohydrogel for long-time stable strain sensors;2024 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS);2024-06-30

4. 3D-Printed MEMS in Italy;Micromachines;2024-05-22

5. Innovation leading development: a glimpse into three-dimensional bioprinting in Israel;Bio-Design and Manufacturing;2024-04-29