Computational Investigation of the Splashing Phenomenon Induced by the Impingement of Multiple Supersonic Jets onto a Molten Slag

Computational Investigation of the Splashing Phenomenon Induced by the Impingement of Multiple Supersonic Jets onto a Molten Slag–Metal Bath

Published:2016-03-22 Issue:12 Volume:55 Page:3630-3640
ISSN:0888-5885
Container-title:Industrial & Engineering Chemistry Research
language:en
Short-container-title:Ind. Eng. Chem. Res.

Author:

Li Mingming¹²,Li Qiang¹²,Kuang Shibo³,Zou Zongshu¹²

Affiliation:

1. School of Metallurgy, Northeastern University, Heping District, Shenyang, 110819, China

2. Key Laboratory of Ecological Utilization of Multi-metallic Mineral of Education Ministry, Northeastern University, Heping District, Shenyang, 110819, China

3. Department of Chemical Engineering, Monash University, Clayton, Victoria 3800, Australia

Funder

Ministry of Education of the People's Republic of China

National Natural Science Foundation of China

Publisher

American Chemical Society (ACS)

Subject

Industrial and Manufacturing Engineering,General Chemical Engineering,General Chemistry

Link

https://pubs.acs.org/doi/pdf/10.1021/acs.iecr.5b03301

Reference55 articles.

1. Fluid Flow Analysis of Jets from Nozzles in Top Blown Process.

2. Comprehensive Model of Oxygen Steelmaking Part 1: Model Development and Validation

3. Comprehensive Model of Oxygen Steelmaking Part 2: Application of Bloated Droplet Theory for Decarburization in Emulsion Zone

4. Comprehensive Model of Oxygen Steelmaking Part 3: Decarburization in Impact Zone

5. Urquhart, R. C.Importance of metal/slag emulsions in oxygen steelmaking. Master Thesis,McGill University,Montreal, 1970.

Cited by 38 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Fluid Dynamics of Interacting Rotor Wake with a Water Surface;Drones;2024-09-09

2. Numerical Simulation of Multiphase Flow in Top-Blown Converter Smelting Lead Anode Slime Process;JOM;2024-08-21

3. Simulating and Evaluating the Multiphase Jet Flow Characteristics of a Five‐Hole Oxygen Lance under Nonisothermal Conditions;steel research international;2024-04-25

4. Effect of Swirl Angle on Interaction between Swirl Oxygen Lance Jet and Melt Pool;Archives of Foundry Engineering;2024-03-18

5. Numerical Simulation of Droplet Splashing Behavior in Steelmaking Converter Based on VOF-to-DPM Hybrid Model and AMR Technique;Metallurgical and Materials Transactions B;2024-02-28