Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing-Reference-Cited by-同舟云学术

Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing

Published:2019-08-15 Issue:9 Volume:4 Page:13879-13888
ISSN:2470-1343
Container-title:ACS Omega
language:en
Short-container-title:ACS Omega

Author:

Zander Nicole E.¹^ORCID,Park Jay H.²,Boelter Zachary R.¹,Gillan Margaret A.³

Affiliation:

1. U.S. Army Research Laboratory, Weapons and Materials Research Directorate, Aberdeen Proving Ground, Aberdeen, Maryland 21005, United States

2. Francis College of Engineering, University of Massachusetts Lowell, Lowell, Massachusetts 01854, United States

3. Henry M. Rowan College of Engineering, Rowan University, Glassboro, New Jersey 08028, United States

Funder

U.S. Department of Energy

Army Research Laboratory

Publisher

American Chemical Society (ACS)

Subject

General Chemical Engineering,General Chemistry

Link

http://pubs.acs.org/doi/pdf/10.1021/acsomega.9b01564

Reference55 articles.

1. Degradation of ABS during repeated processing and accelerated ageing

2. Mohammed, M. I.; Das, A.; Gomez-Kervin, E.; Wilson, D.; Gibson, I. In EcoPrinting: Investigating the use of 100% Recycled Acrylonitrile Butadiene Styrene (ABS) for Additive Manufacturing, Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium, 2017; pp 532–542.

3. Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid

4. Polymer recycling in an open-source additive manufacturing context: Mechanical issues

5. Recycled polyethylene terephthalate as a new FFF feedstock material

Cited by 67 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Potential and challenges of recycled polymer plastics and natural waste materials for additive manufacturing;Sustainable Materials and Technologies;2024-09

2. Prospects of mono cellulosic and cellulosic-glass hybrid fillers reinforced polypropylene composites;Materials Research Express;2024-07-01

3. Mechanical and tribological behaviour of three-dimensional printed almond shell particles reinforced polylactic acid bio-composites;Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications;2024-04-24

4. Textile production by additive manufacturing and textile waste recycling: a review;Environmental Chemistry Letters;2024-04-05

5. Subtle differences in recycled polypropylene from rheology to additives impacts ease of circularity in materials extrusion additive manufacture;Additive Manufacturing;2024-04