Role of GO and Photoinitiator Concentration on Curing Behavior of PEG-Based Polymer for DLP 3D Printing-Reference-Cited by-同舟云学术

Role of GO and Photoinitiator Concentration on Curing Behavior of PEG-Based Polymer for DLP 3D Printing

Published:2024-01-08 Issue: Volume: Page:
ISSN:2470-1343
Container-title:ACS Omega
language:en
Short-container-title:ACS Omega

Author:

Nguyen Men Thi Hong¹,Kim Jong Hoon¹,Jang Woo Tae¹,Jung Yun Jae¹,Park Eun Jin²³,Ha Tai Hwan²³^ORCID,Ahn Sang Jung⁴,Kim Young Heon¹^ORCID

Affiliation:

1. Graduate School of Analytical Science and Technology (GRAST), Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea

2. Core Research Facility Management Center, Korea Research Institute of Bioscience and Biotechnology (KRIBB), 125 Gwahak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea

3. Department of Nanobiotechnology, KRIBB School of Biotechnology, Korea University of Science and Technology (UST), 217 Gajeong-ro, Yuseong-gu, Daejeon 34113, Republic of Korea

4. Korea Research Institute of Standard and Science (KRISS), 267 Gajeong-ro, Yuseong-gu, Daejeon 34113, Republic of Korea

Funder

Chungnam National University

Publisher

American Chemical Society (ACS)

Link

https://pubs.acs.org/doi/pdf/10.1021/acsomega.3c05378

Reference40 articles.

1. A Review on Modeling Cure Kinetics and Mechanisms of Photopolymerization

2. Photopolymerization in Polymer Templating

3. Spatial and temporal evolution of the photoinitiation rate for thick polymer systems illuminated with polychromatic light

4. Electrodeposition-based 3D Printing of Metallic Microarchitectures with Controlled Internal Structures

5. Brady, G. A.; Chu, T. M.; Halloran, J. W. Curing Behavior of Ceramic Resin for Stereolithography. 1996 International Solid Freeform Fabrication Symposium; University of Texas, 1996; pp 403–410.