Investigation of the AgCl Formation Mechanism on the Ag Wire Surface for the Fabrication of a Marine Low-Frequency-Electric-Field-Detection Ag/AgCl Sensor Electrode-Reference-Cited by-同舟云学术

Investigation of the AgCl Formation Mechanism on the Ag Wire Surface for the Fabrication of a Marine Low-Frequency-Electric-Field-Detection Ag/AgCl Sensor Electrode

Published:2022-06-24 Issue:29 Volume:7 Page:25110-25121
ISSN:2470-1343
Container-title:ACS Omega
language:en
Short-container-title:ACS Omega

Author:

Cho Kang Rae¹^ORCID,Kim Minhye¹,Kim Bupmo²,Shin Gahye¹,Lee Sangkyu³,Kim Wooyul¹^ORCID

Affiliation:

1. Department of Energy Engineering/KENTECH Institute for Environmental and Climate Technology, Korea Institute of Energy Technology (KENTECH), Naju 58330, Republic of Korea

2. Department of Chemical Engineering & Division of Environmental Science and Engineering, Pohang University of Science and Technology, Pohang, Gyeongbuk 37673, Republic of Korea

3. Maritime Technology Research Institute 1st Directorate Agency for Defense Development, Jinhae-gu, Changwon-si 51698, Republic of Korea

Funder

Agency for Defense Development

Publisher

American Chemical Society (ACS)

Subject

General Chemical Engineering,General Chemistry

Link

https://pubs.acs.org/doi/pdf/10.1021/acsomega.2c01481

Reference33 articles.

1. Impedance characterization of silver/silver chloride micro-electrodes for bio-sensing applications

2. Influence of fabrication procedure on the electrochemical performance of Ag/AgCl reference electrodes