Fe–Ni–MCM-41 Catalysts for Hydrogen-Rich Syngas Production from Waste Plastics by Pyrolysis–Catalytic Steam Reforming-Reference-Cited by-同舟云学术

Fe–Ni–MCM-41 Catalysts for Hydrogen-Rich Syngas Production from Waste Plastics by Pyrolysis–Catalytic Steam Reforming

Published:2017-07-25 Issue:8 Volume:31 Page:8497-8504
ISSN:0887-0624
Container-title:Energy & Fuels
language:en
Short-container-title:Energy Fuels

Author:

Zhang Yeshui¹,Huang Jun²,Williams Paul T.¹^ORCID

Affiliation:

1. School of Chemical and Process Engineering, University of Leeds, Leeds LS2 9JT, United Kingdom

2. Laboratory for Catalysis Engineering, School of Chemical and Biomolecular Engineering, The University of Sydney, Sydney, New South Wales 2006, Australia

Funder

H2020 Marie Sklodowska-Curie Actions

Australian Research Council

Publisher

American Chemical Society (ACS)

Subject

Energy Engineering and Power Technology,Fuel Technology,General Chemical Engineering

Link

http://pubs.acs.org/doi/pdf/10.1021/acs.energyfuels.7b01368

Reference36 articles.

1. PlasticsEurope. Plastics—The Facts 2016;PlasticsEurope:Brussels, Belgium, 2016.

2. National Research Council and National Academy of Engineering. The Hydrogen Economy: Opportunities, Costs, Barriers and R&D Needs;National Academies Press:Washington, D.C., 2004.

3. Production of Hydrogen from Plastics by Pyrolysis and Catalytic Steam Reform

4. Syngas production from catalytic gasification of waste polyethylene: Influence of temperature on gas yield and composition

5. Optimum operating conditions for a two-stage gasification process fueled by polypropylene by means of continuous reactor over ruthenium catalyst

Cited by 50 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Comparing carbon-saving potential of the pyrolysis of non-recycled municipal plastic waste: Influences of system scales and end products;Journal of Cleaner Production;2024-09

2. Selective H2 production from plastic waste through pyrolysis and in-line oxidative steam reforming;Energy;2024-09

3. Assessment of Boil-Off Losses and Their Cost Implication during Liquid Hydrogen Tank Filling with and without Precooling;Energies;2024-08-17

4. Upcycling of plastic wastes for hydrogen production: Advances and perspectives;Renewable and Sustainable Energy Reviews;2024-05

5. Two-stage thermal pyrolysis of plastic solid waste: Set-up and operative conditions investigation for gaseous fuel production;Waste Management;2024-04