The thermal capacity of pure iron

Abstract

Although the heat capacity of iron at different temperatures has been the subject of a number of investigations in the past, it is only recently that iron of purity greater than 99.9 % has been available. Furthermore, in most previous determinations the property actually measured has been the total heat over a relatively large temperature range. Specific heats deduced from such measurements are liable to appreciable error, since if the total heat curve is smoothed, small fluctuations in the specific heat will be concealed, whereas if the actual observations are retained without smoothing, fluctuations which have no physical existence may appear in the result. Thus, suppose that the total heat is measured from 50 to 145 and from 50 to 155° C, the former being in error by 1 part in 1000 in excess and the latter the same amount in defect, the error in the specific heat over the range 145-155° C will be almost 2%. Evidently a real variation of 1 or 2% would be liable to pass unnoticed if any smoothing is undertaken, and conversely, fluctuations of this order may be introduced spuriously if the observations are used without smoothing. In general, calorimetry from high temperatures cannot be carried out to an accuracy of 1 part in 1000, and in any case, even this accuracy is insufficient at temperatures of the order of 1000° C.