The utilization of red mud waste as industrial honeycomb catalyst for selective catalytic reduction of NO

Abstract

As a new way for the high-value utilization of red mud (RM) waste, we proposed an improved approach to prepare the RM-based sludge/powder via the sulfuric acid hydrothermal dissolution and NH 3 aqueous precipitation route and then the RM-based industrial-sized honeycomb (150 × 150 × 600 mm) was successfully produced by the extrusion moulding method in pilot scale. The synthesized RM-based powdery/honeycomb catalyst exhibited more than 80% deNO x activity and good durability of H 2 O and SO 2 above 350°C. But the decline of NO conversion was also observed above 350°C, which was confirmed to result from the increased oxygenation of NH 3 at high temperature. To improve the NO conversion at high temperature, NH 3 was shunted and injected into the catalyst bed at two different places (entrance and centre) to facilitate its uniform distribution, which relieved the oxidation of NH 3 and increased deNO x efficiency with 98% NO conversion at 400°C. This work explored the industrial application feasibility for the RM-based honeycomb catalyst as well as the possible solution to decrease the oxygenation of NH 3 at high temperature, which presented a valuable reference for the further pilot tests of RM catalyst in industry.