Effect of Plasma Surface Treatment on Shear Bond Strength with Denture Base Resin in Co–Cr Alloy, Ti–6Al–4V Alloy, and CP–Ti Alloy

Abstract

The purpose of this study was to examine the effect of plasma treatment by treating the surface of Co–Cr alloy, Ti–6Al–4V alloy, and CP–Ti alloy as a material for denture metal frameworks with non-thermal atmospheric pressure plasma (NTAPP) and measuring their shear bond strength (SBS) with a heat-cured resin. 20 specimens were prepared for each of Co–Cr, Ti–6Al–4V, and CP–Ti alloys. Each metal alloy group was divided into the following subgroups depending on NTAPP treatment: C (Co–Cr alloy without plasma), T (CP–Ti without plasma), A (Ti–6Al–4V alloy without plasma), CP (Co–Cr alloy with plasma), TP (CP–Ti with plasma) and AP (Ti–6Al–4V alloy with plasma). Specimens were treated with a metal conditioner and bonded to a denture base resin. SBS was measured using a universal testing machine. All data obtained were statistically analyzed using two-way analysis of variance (ANOVA), Tukey’s honestly significant difference (HSD) test, and independent t-test. The mean values (SD) of SBS (MPa) were: 10.31 (1.19) for C group; 12.43 (0.98) for T group; 13.75 (2.02) for A group; 13.53 (1.61) for CP group; 16.87 (1.55) for TP group; 17.46 (1.65) for AP group. The SBS of the AP group was the highest while that of the C group was the lowest. SBS of specimen treated with NTAPP was significantly increased regardless of metal alloy types (p < 0.001). Within the limitations of this study, NTAPP can increases the SBS of Co–Cr alloy, CP–Ti alloy, and Ti–6Al–4V alloy with a denture base resin.