Preparation of Carbon Fiber-Polyacrylamide Composite Hydrogel Based on Surface Electric-Initiated Polymerization

Abstract

Conductive hydrogels have shown excellent application prospects in the fields of bioelectronics, tissue engineering, wearable devices, etc. However, its poor compatibility at the organic-inorganic interface affects its mechanical strength and limits its wide application. We prepared carbon fiber-polyacrylamide organic-inorganic composite material by electrochemical polymerization using N,N-methylenebisacrylamide as the crosslinking agent, acrylamide as the monomer, and carbon fiber as the conductive filler. It forms a conductive hydrogel after absorbing water. The effects of monomer concentration, reaction time, and current on the composite material were investigated in this article. The experimental results show that a large number of irregular bumps are produced on the surface of carbon fiber, and various characterization tests show that it is polyacrylamide (PAM) that successfully attached to carbon fiber. Under the same electrochemical polymerization time, the current density and monomer concentration have little effect on the molecular weight which mainly concentrated around 6.2 × 105. The graft modification of PAM reduces the defects on the surface of the carbon fiber, and the composite effect is good.