Performance Evaluation of Epoxy Resin/Modified Bentonite Composite
-
Published:2023-09-30
Issue:
Volume:
Page:19-29
-
ISSN:2581-9003
-
Container-title:Earthline Journal of Chemical Sciences
-
language:en
-
Short-container-title:EJCS
Author:
Umar Falalu Shuaibu1, Yazid Salele2, Dambatta Haruna Musa1, Ahmad Kabiru Bashir3, Adam Ansar Bilyamin4, Muhammad Shittu Abubakar5
Affiliation:
1. Department of Pure and Industrial Chemistry, Bayero University, Kano, Nigeria 2. Department of Chemistry, Federal College of Education, Katsina, Nigeria 3. Department of Chemistry, Federal Unversity, Lokoja, Nigeria 4. Department of Chemical Science, Federal University, Wukari, Nigeria 5. Department of Chemistry, University of Jos, Nigeria
Abstract
Performance evaluation of the prepared composite such as tensile strength, flexural strength, impact strength, hardness strength, and abrasion/wear resistance were carried out. The results obtained as: tensile (the epoxy is 6.25 MPa while, for the 5% bentonite reinforced composite is 6.79 MPa), flexural (the epoxy is 8.42 MPa while, for the 5% bentonite reinforced composite is 14.64 MPa), impact (the epoxy is 40.82 J/m2 while, for the 5% bentonite reinforced composite is 60.78 J/m2 ), hardness (the epoxy is 48.32 MPa while, for the 5% bentonite reinforced composite is 62.82 MPa), abrasion/wear resistance (the epoxy is 0.2410-3mm3/Nm while, for the 5% bentonite reinforced composite is 0.1410-3mm3/Nm), the results of performance evaluation shows that the epoxy resin/modified bentonite composite have potential application in surface coating, packaging, and tiles.
Publisher
Earthline Publishers
Reference8 articles.
1. Gonzalez, M.G., Carlos, J.G., & Baselga, J. (2010). Application of FT-IR on epoxy resins. A Journal of Material Science, Engineering and Technology, 267. 2. Falalu, S.U., Haruna, M.D., Ushie, O.A., Adam, A.B., Zaharaddeen, M., & Kabiru, B.A. (2023). Synthesis and characterisation of epoxy resin/modified bentonite composite. International Research Journal of Chemistry, 39, 17-27. 3. Hakiki, F., Salam, D. D., Akbari, A., Nuraeni, N., Aditya, W., & Siregar, S. (2015, October). Is epoxy-based polymer suitable for water shut-off application?. Paper presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition, Nusa Dua, Bali, Indonesia. https://doi.org/10.2118/176457-MS 4. Mahadeva Raju, G.K., Dakshayini, B.S., Madhu, G.M., Ameen Khan, M., & Dinesh Sankar Reddy, P. (2018). Characterizing and modelling of mechanical properties of epoxy polymer composites reinforced with bentonite clay. Materials Today: Proceedings, 5(14), 28098-28107. https://doi.org/10.1016/j.matpr.2018.10.051 5. Oliwa, R., Heneczkowski, M., Oleksy, M., & Galina, H. (2016). Epoxy composites of reduced flammability. Composites Part B: Engineering, 95, 1-8. https://doi.org/10.1016/j.compositesb.2016.03.074
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|