Viability the use of drone applied in the mapping of artisanal commercial fisheries: A case study in Sepetiba Bay, Rio de Janeiro

Abstract

ABSTRACT: This article presents an experimental study to verify the feasibility of using the emerging UAV technology in the mapping of fishing grounds exploited by artisanal fishing in Sepetiba Bay, in the south of the state of Rio de Janeiro-Brazil, aiming to better understand the functionality and information generated by the equipment, and whether the data can help improve local fisheries management and also provide information for the implementation of simplified traceability for regional fish. The study area included four locations, Ilha da Madeira, Vila Geny, Coroa Grande and Ponte Preta, all located in Sepetiba Bay, located in the municipality of Itaguaí, in the southern region of the state of Rio de Janeiro. The aerial mapping was carried out in September, October and November 2017, between 10 am and 12 pm (GMT-3), employing a Phantom 3 Professional UAV (DJI, Shenzhen, China), Anac Brasil registration number PP-011092014. The onboard camera a DJI 4K Edition Sony Exmor R Model IMX117: 7.81mm equipped with a CMOS sensor dimension of 6.2 mm, 4000 x 3000 12 megapixel resolution, with an f/2.8 lens and field of view (FOV) of 94, having a focal length of 14mm. Images were collected perpendicularly to the main plan. Flight height was set at 80 m, flight speed was determined based on the overlap of 80%, dimension of area to be mapped, and battery life. Hence, the operator utilized a average flight speed of 25 km/h. ground sample distance (GSD) was 1.20 cm/px. and an overlap of 80% between images was established to avoid possible failures and orthomosaic information gaps. For each fishery mapped, standard software processing was carried out, which consists of: aligning the photos, creating a point cloud, creating a digital elevation model, and finally the orthomosaic itself. Once processed, the orthomosaics were exported from Agis Soft Photo Scan Professional to Google Earth (Google Inc.), where it is possible to make a more comprehensive assessment of fisheries in a much more practical and faster way. A total of four flights were carried out, one for each study area, averaging 10 minutes each. As a result, the technology proved to be viable to apply, since it made it possible to identify and map the areas defined for this research, generating data such as distance and, characteristics of the place, which could be used to track the fish caught and landed, in addition to enabling the monitoring of vessels and fishing, and thus improve the management of local fisheries.