Abstract
Analysis of the list of liquid wastes of hazard classes I and II in the Federal Classification Catalog of waste (FCCW) showed that one of the most common wastes is wastewater, waste technological solutions containing chromium ions(III, VI). This type of waste accounts for up to 15% of the total amount of liquid technogenic waste of hazard classes I and II, formed as a result of the activities of electroplating and chemical enterprises. Hexavalent chromium compounds belong to the class of toxic, extremely dangerous substances, the maximum permissible concentration (MPC) in the water of drinking water bodies for chromium (VI) is 0.05 mg/L. A feature of this type of waste is the increased salt background characteristic of electrolytes used in electroplating industries. The article presents experimental data, as well as basic technological solutions for the neutralization of chromium-containing wastewater and waste technological solutions. A technological scheme containing four main stages is proposed: reduction of hexavalent chromium, isolation of trivalent chromium from aqueous solutions, separation of accompanying compounds of heavy and non-ferrous metals, filtration post-treatment of the solution. Experimental studies have shown that, depending on the ionic composition of the medium, the efficiency of isolation of trivalent chromium compounds from aqueous solutions by electroflotation varies from 8 to 95%. The introduction of an anionic flocculant makes it possible to increase the degree of extraction to 99% or more.