Affiliation:
1. Bureau of Economic Geology, Jackson School of Geosciences, The University of Texas at Austin, University Station Box X, Austin, TX 78713, USA (e-mail: julia.gale@beg.utexas.edu)
2. Department of Petroleum and Geosystems Engineering, The University of Texas at Austin, 1 University Station C0300, Austin, TX 78712, USA
Abstract
AbstractShale gas reservoirs are commonly produced using hydraulic fracture treatments. Microseismic monitoring of hydraulically induced fracture growth shows that hydraulic fractures sometimes propagate away from the present-day maximum horizontal stress direction. One likely cause is that natural opening-mode fractures, which are present in most mudrocks, act as weak planes that reactivate during hydraulic fracturing. Knowledge of the geometry and intensity of the natural fracture system and the likelihood of reactivation is therefore necessary for effective hydraulic fracture treatment design. Changing effective stress and concomitant diagenetic evolution of the host-rock controls fracture initiation and key fracture attributes such as intensity, spatial distribution, openness and strength. Thus, a linked structural-diagenesis approach is needed to predict the fracture types likely to be present, their key attributes and an assessment of whether they will impact hydraulic fracture treatments significantly. Steep (>75°), narrow (<0.05 mm), calcite-sealed fractures are described in the Barnett Shale, north-central Texas, the Woodford Formation, west Texas and the New Albany Shale in the Illinois Basin. These fractures are weak because calcite cement grows mostly over non-carbonate grains and there is no crystal bond between cement and wall rock. In bending tests, samples containing natural fractures have half the tensile strength of those without and always break along the fracture plane. By contrast, samples with quartz-sealed fractures do not break along the fracture plane. The subcritical crack index of Barnett Shale is >100, indicating that the fractures are clustered. These fractures, especially where present in clusters, are likely to divert hydraulic fracture strands. Early, sealed, compacted fractures, fractures associated with deformation around concretions and sealed, bedding-parallel fractures also occur in many mudrocks but are unlikely to impact hydraulic fracture treatments significantly because they are not widely developed. There is no evidence of natural open microfractures in the samples studied.
Publisher
Geological Society of London
Subject
Fuel Technology,Energy Engineering and Power Technology,Geology,Geochemistry and Petrology
Reference38 articles.
1. Subcritical crack growth in geologic materials;Atkinson;Journal of Geophysical Research,1984
2. Stress corrosion cracking of quartz: A note on the influence of chemical environment
3. Recent development of the Barnett Shale play, Fort Worth Basin;Bowker;West Texas Geological Society Bulletin,2003
4. Carr D. D. (1981) in Studies of the New Albany Shale (Devonian and Mississippian) and Equivalent Strata in Indiana, Lineament analysis, eds Hasenmueller N. R. Woodard G. S. (US Department of Energy), contract number DE-AC 21-76MC 05204, pp 62–69.
5. Seepage forces, important factors in the formation of horizontal hydraulic fractures and bedding-parallel fibrous veins (?beef? and ?cone-in-cone?)
Cited by
100 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献