Temperature Dependence of 1/f Noise and Electrical Conductivity Measurements on p-type a-Si:H Devices

Abstract

ABSTRACTNoise and electrical conductivity measurements were made at temperatures ranging from approximately 270°K to 320°K on devices fabricated on as grown Boron doped p-type a-Si:H films. The room temperature 1/f noise was found to be proportional to the bias voltage and inversely proportional to the square root of the device area. As a result, the 1/f noise can be described by Hooge’s empirical expression [1]. The 1/f noise was found to be independent of temperature in the range investigated even though the device conductivity changed by a factor of approximately 4 over this range. Conductivity temperature measurements exhibit a T-0.25 dependence, indicative of conduction via localized states in the valence band tail [2,3]. In addition, multiple authors have analyzed hole mobility in a-Si:H and find that the hole mobility depends on the scattering of mobile holes by localized states in the valence band tail [4-7]. We conclude that the a-Si:H carrier concentration does not change appreciably with temperature, and thus, the resistance change in this temperature range is due to the temperature dependence of the hole mobility. Our results are applicable to a basic understanding of noise and conductivity requirements for a-Si:H materials used for microbolometer ambient temperature infrared detection.