Influence of Amorphous Layers on Performance of Nanocrystalline/Amorphous Superlattice Si Solar Cells

Abstract

AbstractNanocrystalline Si:H is an important material for solar cells. The electronic properties of the material depend critically upon the degree of crystallinity, the efficacy of passivation of the grain boundaries and impurities, particularly oxygen, in the material. In this paper, we examine different degrees of passivation of grain boundaries by amorphous Si, by deliberately introducing various thicknesses of amorphous tissue layers at the grain boundaries. The device structure consisted of a p+nn+ cell on stainless steel where the base n layer was fabricated using alternating layers of amorphous (a-Si) and crystalline (nc-Si) phases, creating a superlattice structure. The thicknesses of the amorphous and crystalline phases were varied to study their influence on structural and electrical properties such as grain size and diffusion length. We find that <111> grain continued to be nucleate independently of the thickness of the amorphous layer, but the grain size in <220> grain decreased when the thickness of the tissue layer became very large. We also find that as the thickness of the amorphous tissue layer increased, the quantum efficiency at 800 nm decreased and the open circuit voltage increased. For significant thickness of amorphous layer, the transport properties degrade dramatically, causing an inflection in the I-V curve, probably because of difficulty of holes tunneling across the barriers.