Post Titanium Silicide Processing

Abstract

AbstractDecreasing contact dimensions coupled with the need for planarization to accommodate multiple layers of metal have created many challenges for the contact etch module. For example, contact etch processes are often required to stop on thin titanium silicide while at the same time forming high aspect ratio, straightwalled contacts. In this paper, the impact of various dielectric compositions and contact etch process parameters on etch profile, selectivity, and contact resistance is presented for the formation of high aspect ratio, submicron contacts to thin TiSi2 layers. The etch profile is formed by RIE using a mixture of CHF3 and various amounts of CF4. Surprisingly, the sidewall angle and selectivity to silicide showed little dependence on the percent CF4. Contact resistance measurements, however, varied greatly with percent CF4 and contact aspect ratio. The variation of contact resistance with etch chemistry was attributed to a variation in the extent of fluorocarbon polymer film formation, which in turn depends on the ratio of carbon to fluorine in the plasma. Finally, post contact etch treatments were examined for efficiency in removing the polymer films from the high aspect ratio contacts.